picoPSU-120-25V change control - 02/01/2005 Initial release - 06/06/2005 Changed C(out) to 180uF / 16 V (shorter) , unit can fit in tighter spaces now. - 06/28/2009 Placed mini-FIT-JR 4 pin male/female pair in line with input power cord. This will allow OEMs to easily connect to a variety of power sources while maintaining 5/2.5mm barrel connector compatibility - 06/28/2009 Extended availability for the next 5 years - 05/20/2011 Change C15 (was 15nF) to 12nF X7R/X5R 16V. (higher precision for 12V rail timing) - 05/20/2011 Extended availability for the next 5 years - 01/04/2012 Delayed 3.3V rail startup in relation to 5 and 12V rail. 12V and 5V startup is now slower to avoid over-current during ramp-up. Changes do not affect EMI/RFI, just startup timing. C42=27nF, C16=22nF, C15=27nF, R18=20K replace Q10 with Q10 (MMBT3014) with BSS138, N-MOS SOT-23. - 03/04/2012 Extended availability for the next 5 years - 10/11/2012 Manufacturer has changed inductor color from Blue to Black, P/N affected is SSC-1045D2-R62 - 06/25//2013 Extending availability for the next 5 years - 03/10//2016 Extending availability for the next 5 years - 10/10//2020 Extending availability for the next 5 years